SidebySide 2.0

Making proximity safe and flexible

The SidebySide 2.0 is a height-adjustable bedside bassinet for hospital care in postnatal wards. A lowerable side panel allows for close contact and direct access to the baby. Height adjustment, a tiltable lying surface and two size options support flexible rooming-in arrangements in everyday hospital practice.

  • Side table function
  • Single & twin
  • Complies with DIN EN 50637
SidebySide 2.0 bedside bassinet with its side panel lowered beside a patient bed

At a glance

What sets SidebySide 2.0 apart

Closeness, safe care and flexible adjustment at the patient’s bedside

Direct access to the SidebySide 2.0 infant tray from the adjacent patient bed Lowerable side windows Rooming-in funciton

Lower in stages

The transparent side windows can be adjusted to different positions depending on the application. When lowered, it provides direct access to the newborn.

 

Maintaining visual contact

The transparent side windows allow a view of the baby even when the side window is closed, making it easier for parents and healthcare staff to monitor the newborn.

 

Accessibility at the mother’s bedside

The combination of height adjustment and a lowerable side windows facilitates adaptation to different patient beds and care situations.

 

Separate lying surface for the baby

The newborn lies in a separate, clearly defined bassinet. Positioning and use must follow the instructions for use and clinical standards.

Direct access to the SidebySide 2.0 infant tray from the adjacent patient bed
Adjusting the transparent side panel of the SidebySide 2.0 bassinet Direct access to the newborn Lowerable side window

The transparent side window can be lowered in stages. This provides direct access to the baby, whilst maintaining eye contact and physical closeness between the mother and her newborn.

Adjusting the transparent side panel of the SidebySide 2.0 bassinet
SidebySide 2.0 Twin with two infant manikins in the wider tray For one newborn or twins Alternative twin version

The SidebySide 2.0 is available in single or twin versions. The wider twin version supports rooming-in and care arrangements following multiple births.

SidebySide 2.0 Twin with two infant manikins in the wider tray
Operating the SidebySide 2.0 height-adjustment foot pedal Adjust it ergonomically with the foot pedal Stepless height adjustment

Adjust the height continuously by 300 mm using the foot pedal and gas spring. This feature lets you match the mattress height to the patient bed, care situation and patient’s stature.

Operating the SidebySide 2.0 height-adjustment foot pedal
SidebySide 2.0 infant tray shown with the head end raised Mechanically adjustable from 0° to 15° Adjustable reclining surface

Adjust the reclining seat to an elevated head position using the mechanical tilt mechanism. The lying surface can be tilted mechanically from 0° to 15° to raise the head end.

SidebySide 2.0 infant tray shown with the head end raised
Colour samples for product components and upholstery Wide range of frame and upholstery colours Colours for fittings and upholstery

The SidebySide 2.0 offers a wide range of colours for its coloured components. We finish the handle, accessory basket and decorative elements in the same colour of your choice; the plastic cover and side panels remain white as standard. You can find further colours in our colour chart in the downloads section.

Colour samples for product components and upholstery

Rooming-in & care

Hospital bassinets with side-attachment function for use

For closeness, breastfeeding and easy access to care right at the patient’s bedside.

The SidebySide 2.0 supports modern rooming-in and care concepts in hospitals. Clinicians can position the height-adjustable hospital bassinet right next to the patient’s bed. The lowerable transparent side window keeps the newborn visible and within easy reach, facilitating breastfeeding, soothing and close-contact care, especially when mobility is restricted after childbirth.

A foot pedal allows continuous height adjustment of the lying surface by 300 mm. Four lockable swivel castors make it easy to manoeuvre the cot within the patient’s room and on the ward.

To cater for different care settings, the SidebySide 2.0 is available as a single or twin bed. Smooth, easily accessible surfaces facilitate systematic cleaning and surface disinfection between uses.

Typical applications

  • Rooming-in on the postnatal ward
  • Breastfeeding directly at the patient’s bedside
  • Post-caesarean section care
  • Soothing the newborn at night
  • Accommodation for single babies or twins
  • Flexible use in the patient’s room

Versions and specifications

Available as a single or twin bed

Two size options to suit different rooming-in and care arrangements.

sidybyside-2.0-infant-bed-blue-011.png

SidebySide 2.0 Single

The single version is designed for a newborn baby. With a total width of 480 mm, it remains compact and healthcare professionals can easily position it even in patient rooms where space is limited.

  • Lying surface: 770 × 415 mm
  • Mattress: 770 × 380 mm
  • Maximum load: 12 kg
  • Safe working load: 20 kg

Focus topic: rooming-in

Why bedside access matters after birth

You can stay close to your child without sacrificing a separate, safe sleeping area.

After the birth, rooming-in encourages continuous contact between the mother and her newborn. Conventional hospital bassinets are often placed next to the patient’s bed, so the mother must lean over or sit up to reach the baby. This can make it difficult for the mother to reach the baby independently, particularly following a caesarean section or in cases of reduced mobility.

The SidebySide 2.0 combines a separate sleeping area for the newborn with direct proximity to the patient’s bed. The height can be adjusted using a foot pedal, whilst the transparent side panel can be lowered in stages. This keeps the baby in view and makes it easier to reach. The design facilitates breastfeeding, soothing and close-contact care without requiring the newborn to lie permanently in the adult bed.

Position the hospital bassinet correctly and operate the side windows and side-opening function in accordance with clinical standards to ensure safe use.

Key takeaways:

  • More direct access to the newborn
  • Separate lying surface despite physical proximity
  • Particularly relevant for those with limited mobility

Facts & figures

Key technical specifications of the SidebySide 2.0

Dimensions, load-bearing capacity and adjustment options for planning and procurement

General characteristics
Overall length900 mm
Height adjustment300 mm
Adjustment mechanismGas spring with foot pedal
Reclining angle0° to 15°
Castors4 swivel castors with brakes
Medical deviceClass I
Ambient temperature+10 °C to +40 °C
Relative humidity30% to 75%
SidebySide 2.0 Single
Overall width480 mm
Overall height850–1,050 mm
Top edge of mattress570–770 mm
Internal dimensions of the lying surface770 × 415 × 300 mm
Mattress dimensions770 × 380 × 60 mm
Total weight35 kg
Maximum bassinet load12 kg
Safe working load20 kg
SidebySide 2.0 Twin
Overall width750 mm
Overall height890–1,190 mm
Top edge of mattress590–890 mm
Internal dimensions of the lying surface770 × 710 × 300 mm
Mattress dimensions770 × 680 × 60 mm
Total weight41 kg
Maximum bassinet load16 kg
Safe working load24 kg
Materials
Upper bassinetHPL, PETg UV, painted aluminium and painted steel
MattressPolyurethane foam with Sanmed padding
Support columnPowder-coated aluminium
Base frameSteel with ABS plastic cover
CastorsPlastic

Advantages

The benefits at a glance

For mother and child

  • Direct access to the newborn
  • Supports breastfeeding and rooming-in
  • Separate, transparent lying surface

For qualified staff

  • Height-adjustable via a foot pedal
  • Mechanically adjustable reclining surface
  • Easy to move and lock into place

For clinical practice and planning

  • Single and twin versions
  • Easily accessible materials
  • Customisable RAL accent colours

Frequently asked questions

Frequently asked questions about SidebySide 2.0

Answers regarding the use, hygiene, technology and applications of the SidebySide

How does SidebySide 2.0 differ from the previous version of SidebySide?

The SidebySide 2.0 features a newly developed bassinet with a lowerable transparent side window. This means it can function as a side bed or a rooming-in bed. The model is also available in both single and twin configurations.

How do you adjust the height?

Adjust the height continuously using the foot pedal and gas spring. The 300 mm adjustment range lets you match different patient beds and care situations.

Can the side window be opened fully?

You can lower the transparent side window in stages. The current instructions for use outline the permitted positions and guidance for safe use. Before moving the bed, move the side panel to the specified safe position.

How far can the reclining section be tilted?

Adjust the reclining seat mechanically from 0° to 15°. Secure the position using the tilt and locking mechanism provided.

Is the SidebySide 2.0 available for twins?

Yes. In addition to the single version, febromed offers a twin version with a wider lying surface and mattress. It is designed for care arrangements following twin births.

What is the maximum load capacity?

For the single version, the maximum load for the cot, including the child and mattress, is 12 kg. The safe working load, including accessories, is 20 kg. For the twin version, these figures are 16 kg and 24 kg respectively.

How is the hospital bassinet prepared?

Smooth surfaces and easily accessible components facilitate cleaning and surface disinfection. Ensure that cleaning agents, their concentrations and contact times comply with the instructions for use, material approvals and the in-house hygiene plan.

Does SidebySide 2.0 comply with DIN EN 50637?

The SidebySide 2.0 is a hospital bassinet designed in accordance with the current DIN EN 50637 standard. 

Information and product experience

Find out more. Experience it for yourself.

Request further product information or learn about our solutions during a personal live demonstration—either on site in Oelde or online.

Stefan Volkmann, sales director at febromed

Your contact person

Stefan Volkmann

I am happy to advise you personally on any queries you may have regarding SidebySide 2.0 – from initial information right through to detailed project planning.

For closeness, rooming-in and care

Further solutions

Complement the hospital bassinets with suitable solutions for feeding, nappy changing and breastfeeding.