ave 2

Birthing bed with low entry and swivelling foot section

The electrically adjustable ave 2 birthing bed is designed to accommodate a range of situations in the delivery room: from sitting on the edge of the bed, through kneeling and lying positions, to receiving care at the bedside. Integrated control panels and the foot section, which remains attached to the bed, facilitate adaptation to the specific procedure. febromed will advise you on your selection, agree the configuration with you and prepare your quotation for Germany.

  • 600 Mm minimum ground clearance
  • Swivelling foot section remains attached to the bed
  • Supports up to 240 kg
ave 2 birthing bed with blue upholstery and a raised backrest

At a glance

Three functions for everyday use in the delivery room

Woman sitting on the edge of an ave 2 birthing bed in its low position Low entry point

The electric height adjustment lowers the ave 2 to its lowest position. This may be important for sitting on the edge of the bed, as well as for getting in and out of bed. The correct height depends on the individual, the situation and the chosen mattress.

Woman sitting on the edge of an ave 2 birthing bed in its low position
ave 2 birthing bed with the foot section swivelled to the side The foot section remains attached to the bed

The foot section can be swivelled out and stowed away under the seat section. This allows the access from the front to be adjusted whilst the component remains attached to the bed. With this design, there is no need to store a separate foot section in the room.

ave 2 birthing bed with the foot section swivelled to the side
Swivelling side rail with integrated controls on the ave 2 Controls on the side rails

Control panels integrated into the side rails allow the bed to be adjusted electrically. Swivelling side rails facilitate a range of access positions. The instructions for use and the guidelines set by the care team determine which functions may be operated in any given situation.

Swivelling side rail with integrated controls on the ave 2
Pregnant woman supported by two people beside an ave 2 birthing bed

Use in the delivery room

A bed for the different stages of labour

The ave 2 is designed for a variety of positioning and care scenarios surrounding childbirth. The backrest and seat sections are electrically adjustable; the foot section changes the usable surface area and access. This design accommodates different postures without restricting each situation to a single bed position.

During labour, for example, sitting, side-lying or kneeling positions may be required. During labour and delivery, the bed also provides access for healthcare professionals and space for storage or support equipment. After the birth, staff can readjust the recline to suit the care situation.

Involve the support person in the planning: where can they stand, offer support or sit without blocking access routes? The care team decides, together with the woman in labour, which position is suitable in each individual case. The images illustrate possible applications; they are not instructions for a specific clinical situation.

Compare birthing beds

Birthing positions in pictures

Supporting different positions

The ave 2 can be configured for upright, sitting, kneeling and lying positions. The following examples illustrate the role that bed positioning and additional support can play in this regard. Care staff select, secure and change the position on a case-by-case basis.

Pregnant woman kneeling on an ave 2 and leaning on a birthing ball

Kneeling with the support of a ball

In this picture, the woman in labour is kneeling on the lying surface and resting her upper body on a ball. This example illustrates one way of incorporating additional support. Healthcare professionals decide whether and how to use a ball. This illustration does not show the ball as included in the scope of delivery of the ave 2.

Operation and care

Adjusting the foot section, leg supports and side rails

Foot section stowed beneath the seat section of the ave 2

Changing access using the foot section

You can swivel the foot section to the side and stow it under the seat section, which changes front access. The manufacturer’s documentation also describes a transverse bed function. The appropriate bed position for examination, treatment or care depends on the situation and the instructions for use; the attending specialist staff must approve each application.

Optional addition

ave 2 with Vibwife mattress

Vibwife is an optional active motion system in the form of a mattress. For the appropriate ave 2 configuration, the standard mattress is replaced by the Vibwife mattress. The bed continues to provide height and position adjustments; Vibwife adds rhythmic movement to the lying surface. Customers can request this combination as a separate customisation; it is not included automatically with every ave 2.

Woman kneeling on an orange ave 2 and leaning on a padded support bar

Choose your equipment

Choose accessories to suit your workflow

The equipment you require depends on the intended positions, your bedside organisation, and the requirements for cleaning and disinfection, and comfort. The manufacturer’s documentation lists the following groups of accessories. We will work with you to determine which items are available and can be combined for the model on offer. The standard scope of supply and any additional components selected will be listed separately in the quotation.

  • Positioning and support Discuss additional support options, such as a padded support bar or removable grab handles. The key factors are the desired positions and the appropriate method of attachment to the bed. The illustration shows a support bar as an example of an accessory.
  • Comfort and cushions You can include pillows and additional cushions in the configuration. The selection depends on the existing upholstery design. We will match the requested colours to the specific components available to order; the images shown are not a binding colour chart.
  • Clinical care The accessories overview includes collection bowls, a mobile collection container and an instrument tray. Please consult us to determine which model is best suited to your planned procedures, as well as to cleaning and organisation at the bedside.
  • Infusion and care components Infusion stands and a holder for oxygen cylinders are listed in the documentation. When configuring the system, select the items and consider their mounting, permitted use and space requirements, especially when the bed is being moved.

Facts & figures

Technical data for planning and operation

The following information describes the documented manufacturer’s specification for the ave 2. The confirmed configuration and the associated documentation are authoritative for ordering, room planning and operation. Vibwife is listed as an optional extra with its own load limit.

Dimensions and weight
Manufacturer’s stated overall length 2,122 mm
Width with side rails raised 980 mm
Product weight 245 kg
Maximum patient weight for the bed 240 kg / 220 kg with Vibwife
Adjustments
Electric height adjustment 600–1,050 mm
Backrest adjustment range −10° to +70°
Seat adjustment range 0° to +18.5°
Trendelenburg adjustment 0° to −10°
Foot section It swivels and can be stowed under the seat section

Frequently asked questions

Frequently asked questions about the ave 2

Key answers regarding the use, specifications and procurement of the ave 2.

Who manufactures the ave 2, and what role does febromed play?

The ave 2 is part of the product range offered by wissner-bosserhoff / LINET Group. febromed is, amongst others, your supplier and point of contact for procurement in Germany. We can assist you with selection and configuration and will provide you with a bespoke quotation. 

For which stages of labour and positions is the ave 2 designed?

The ave 2 is designed as a birthing bed to accommodate a variety of positioning and care scenarios surrounding childbirth. These include, amongst others, sitting, kneeling and lying positions. The bed’s position and accessories are adjusted to suit the specific situation. 

How big and heavy is the ave 2?

The manufacturer states an overall length of 2,122 mm, including the foot section. With the side rails in place, the width is 980 mm. The bed weighs 245 kg without accessories.

What is the load limit for the ave 2 and Vibwife?

The weight limit for the optional Vibwife mattress is 220 kg. Do not apply the higher weight limit for the bed to the Vibwife unit. 

Is Vibwife fitted as standard, and can it be retrofitted?

Vibwife is an optional extra. With the appropriate ave 2 configuration, the Vibwife mattress replaces the standard mattress and provides active rhythmic movements. We assess whether an existing bed is suitable on the basis of its specific design. febromed provides training and instruction. We cannot guarantee that all ave 2 beds can be retrofitted without restriction.

How is the ave 2 cleaned and disinfected?

The current instructions for use for the bed, mattress and accessories apply. The enclosed casings and seamless upholstered surfaces describe the construction; they do not mean that every cleaning agent or procedure is approved. Please consult your hygiene organisation regarding material compatibility, approved products and the procedure to be followed. Request technical documentation via febromed.

What accessories can be requested for the ave 2?

These include, among other things,support bars, grab handles, cushions, pads, covers, as well as components for collection, storage, infusion and organisation. The configuration process checks which items are currently compatible with the desired model. Standard equipment and any additional accessories selected are listed separately in the quotation.

Information and product experience

Find out more. Experience it for yourself.

Request further product information or learn about our solutions during a personalised live demonstration—either in person in Oelde or online.

Stefan Volkmann, sales director at febromed

Your contact person

Stefan Volkmann

I am happy to advise you personally on any queries you may have regarding the ave 2 – from initial information right through to detailed project planning.